Cabot's EasyDeck™ Applicator

Quickly and easily refresh the look of your timber with the Cabot's EasyDeck™ clean and coat maintenance system and be back on your deck in 40 minutes.* Simply shake a bottle of EasyDeck™ Maintenance Coat (sold separately), load into the EasyDeck™ Applicator and you're ready to coat. No prep required.

The EasyDeck™ Applicator is at the heart of this system. Designed with convenience in mind, it allows you to effortlessly coat your timber decking, stairs, and navigate around outdoor furniture with ease. It's backed by a 3-year warranty and the included applicator pad effectively removes dirt and dust, ensuring a consistent and seamless application of the EasyDeck™ Maintenance Coat.

EasyDeck™ is designed for application over existing water-based coatings that are in good condition.

Cabot's EasyDeck™ is the fast, no mess deck refresher.

_{*Conditions of 25°C and 50% relative humidity. More humid or cooler conditions will need longer drying times.}

SPECS

Areas

Decking, Stairs
Clean Up

Water
Sizes

UNIT

PREPARATION

1. Get ready for use

Slide on the EasyDeck™ Applicator Pad and close the latch firmly. Insert the pole and twist the collar until the pole is securely attached.

APPLICATION

2. Shake & insert	Shake the EasyDeck™ bottle for 1 minute prior to using. Shake only with the bottle cap on and keep it handy for later use. Replace the bottle cap with the dispensing nozzle and screw on firmly. Place the EasyDeck™ bottle into the applicator firmly.
3. Get coating!	Unhook the trigger and squeeze the handle 6-10 times until the applicator pad is soaked. Use long, smooth strokes along the direction of the boards. Avoid excessive coating. Wait 40 minutes for the coating to dry, and it's ready to walk on!

MAINTENANCE

4. Clean up

Remove the applicator bottle from the applicator vertically without tilting. Replace the dispensing nozzle with the bottle cap. Unused EasyDeck™ coating can be stored in a cool, dry area for up to a year. Rinse the dispensing nozzle and the applicator pad under running water until the water runs clear. Flush the applicator body with running water whilst pumping the yellow cleaning levers on the sides until the water runs completely clear.

Storage & repeat use

Store in a cool, covered area. It is recommended to wait at least 40 days between uses. The Cabot's EasyDeck™ maintenance system is recommended for use between normal recoat cycles of Cabot's Aquadeck®. Allow at least 30 days after reapplying Aquadeck® to use the EasyDeck™ maintenance system.

HOW TO VIDEOS

How to quickly & easily refresh the look of your timber decking

Available sizes

UNIT