|Preparation||Cabot's Floor Polish should only be applied to a dry and well cured surface (a new coating should be atleast 4 weeks old). Ensure the surface is thoroughly cleaned with Cabot's Floor Clean prior to using Cabot's Floor Polish.|
|Apply with||Mop, Sponge|
IMPORTANT: Do not shake before use
1. Apply Cabot's Floor Polish undiluted with a sponge mop or Cabot's Lambswool applicator. Avoid introducing bubbles when applying and do not allow pools of liquid to form.
2. Allow the surface to dry for 1 hour.
3. Repeat application if a higher gloss level is desired.
Wash your floor regularly using Cabot's Floor Clean to remove dirt and grime. When the surface looks worn, recoat with Cabot's Floor Polish as a regular maintenance solution. If required, old layers of the polish may be stripped off using ammonia-based floor strippers (carefully following manufacturer's instructions).
If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.