Cabot's Floor Polish
Zoom
When the laminate surfaces in your home need looking after, call on Cabot's Laminate Floor Polish. It's the easiest way to help those surfaces live longer lives. Cabot's Laminate Floor Polish has been developed to reduce the appearance of scratches, marks and scuffs on sealed laminate, vinyl, linoleum, cork flooring, polished concrete, slate or ceramic tiles. It can also be used on laminate, melamine, vinyl, sealed marble, MDF and particle board cupboards and furniture surfaces. It not only enhances appearance by reducing scratches and marks but also creates a protective layer that helps prolong the life of coated surfaces.
Whether you're wanting to make laminate floors shine again or after the best polish for laminate and vinyl floors, Cabot’s Laminate Floor Polish delivers visible results you can trust.
| Areas |
|
|---|---|
| Sizes |
|
| Application |
Mop 
Sponge |
| Touch Dry |
- |
| Recoat |
- |
| Coverage |
- |
| Cleaning |
- |
Downloads
Product Data Sheet
Ensure the surface is thoroughly cleaned with Cabot’s Floor Clean prior to application of Cabot’s Laminate Floor Restore (following label directions). Cabot’s Floor Clean will remove dirt and dust to allow Laminate Floor Restore to properly adhere to the surface. Allow the surface to dry fully before applying Cabot’s Laminate Floor Restore.
Hot tip!
IMPORTANT: Do NOT shake before use to minimise bubbles forming.
- Apply 1 coat of Cabot’s Laminate Floor Restore with a sponge mop or Cabot’s Deck Coat lambswool applicator. Do not allow pools of liquid to form on the surface.
- If required, apply 1 further coat following the same application method as above. Additional coats will increase gloss level and durability.
- Allow the product to dry for a minimum of four hours before walking on the surface.
Clean laminate floors regularly with Cabot's Floor Clean to remove dirt, dust and grime. When the surface looks worn, and has lost its lustre, rejuvenate with Cabot's Laminate Floor Restore as a maintenance coat.
Cabot's Laminate Floor Restore
Fast & easy to use
Restores shine
Reduces appearance of scratches & marks
Prolongs the life of coated surfaces
Cabot's Laminate Floor Restore
is available at the following retailers
Calculate total usage
If you are unsure how much product you need, please use our product calculator. Please note minimum length/width is 1 metre and maximum is 50 metres.
Your approx need
Your measurements
Amount needed
This usage calculator provides a general guide only. Actual product requirements may vary based on surface type, condition and preparation, and application method.