Cabot's Cabothane Clear Oil Spraypack
Zoom
Enhance the beauty of your timber doors, windows, trim and furniture with this durable, hard wearing varnish – now available in a convenient spray. This clear polyurethane has been designed to resist stains and scratches and enhance all timber grains. And now it’s easier than ever before to use!
| Areas |
|
|---|---|
| Sizes |
|
| Application |
Spray
|
| Touch Dry |
- |
| Re-coat |
- |
| Coverage |
3 m2/L |
| Cleaning |
Turps
|
Once your coating has worn and deteriorated, it's time for a re-coat.
1. Thoroughly clean the surface with Cabot's Floor Clean and allow to dry. 2. Sand with 180 - 240 grit sandpaper and remove all traces of sanding dust. 3. Then apply another coat of Cabothane Clear following label instructions.
Cabot's Cabothane Clear Oil Spraypack
Dirt and mould resistant
Turps wash up
UV protection
Select colour range
Select colour range
Colour - Clear coat
Sheen - Satin
Timber type - Pine
All swatches displayed on this page show 3 coats on pine timber.
Colour Accuracy: Colours and images displayed here are a guide only and may not represent the true colour due to limitations of the display. For complete satisfaction, test your Cabot's colour selection at home, on a timber offcut (preferably from the same timber you will be using).
Cabot's Cabothane Clear Oil Spraypack
is available at the following retailers
Calculate total usage
If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width is 1 metre and maximum is 50 metres.
Your approx need
Your measurements
Amount needed
Disclaimer note. Lorem Ipsum is simply dummy text of the printing. colours below are available instore to purchase. From these colour bases, you can tint to 100's of colours.